Compact process display unit with very low voltage drop for universal use to
display 4 to 20 mA/HART® signals
Application
• Display of 4 to 20 mA measured values or optionally up to
four of a sensor's HART
®
process variables in all industries
• Use as primary or secondary HART
®
master
• Panel-mount housing or field housing as local display
• Scalable display value
Your benefits
• No external power supply required
• Voltage drop ≤1 V (HART
®
≤1.9 V)
• 5-digit measured value display with 17 mm (0.67 in) digit
height with dimension and bar graph; background lighting
can be activated
• Minimal installation depth
• Easy 3-key operation for configuring the device
• International approvals
ATEX, IECEx, FM, CSA
• SIL interference freeness acc. to EN 61508
• GL marine approval
Products Solutions Services
Technical Information
RIA15
Loop-powered 4 to 20 mA process display unit with
optional HART® communication
TI01043K/09/EN/05.15
71300884
To Next Page
