RIA15
14 Endress+Hauser
Configurator
+temperature
Software for selecting and configuring the product depending on the measuring
task, supported by graphics. Includes a comprehensive knowledge database and
calculation tools:
• For temperature competence
• Quick and easy design and sizing of temperature measuring points
• Ideal measuring point design and sizing to suit the processes and needs of a wide
range of industries
The Configurator is available:
On request from your Endress+Hauser sales office on a CD-ROM for local PC
installation.
W@M Life cycle management for your plant
W@M supports you with a wide range of software applications over the entire
process: from planning and procurement, to the installation, commissioning and
operation of the measuring devices. All the relevant device information, such as
the device status, spare parts and device-specific documentation, is available for
every device over the entire life cycle.
The application already contains the data of your Endress+Hauser device. Endress
+Hauser also takes care of maintaining and updating the data records.
W@M is available:
• Via the Internet: www.endress.com/lifecyclemanagement
• On CD-ROM for local PC installation.
Supplementary documentation
• System components and data manager - solutions to complete your measuring point:
FA00016K/09
• Operating Instructions for process display unit RIA15: BA01073K/09
Operating Instructions for process display unit RIA15 with HART® communication: BA01170K/09
• Ex-related additional documentation:
– ATEX/IEC II2(1)G Ex ia IIC T6: XA01028R/09
– CSA IS, NI: XA01056K/09
– FM IS, NI: XA01097K/09
– cCSAus IS, NI: XA01368K/09
• FMR20:
Technical Information TI01267F
Operating Instructions: BA01578F
To Next Page
Loading...
