Endress+Hauser RIA15 - Page 13

RIA15
Endress+Hauser 13
Device-specific accessories
Protective cover
298 (11.73)201 (7.91)
63
(2.48)
205 (8.07)
A0017731
 5 Dimensions of protective cover, engineering unit mm (in)
Mounting kit for wall/
pipe mounting
11.5
(0.45)
82 (3.23)
80 (3.15)
115 (4.53)
A0017801
 6 Dimensions of mounting bracket, engineering unit mm (in)
HART
®
communication
resistance module
54 (2.13)
31 (1.22)
24 (0.94)
22 (0.87)
8.1 (0.32)
A0020858
 7 Dimensions of communication resistance module, engineering unit mm(in)
Active barrier RN221N
96 (3.78)
110 (4.33)
112 (4.41)
22.5
(0.89)
A0028251
 8 Dimensions of active barrier, engineering unit mm (in)
For further information, see TI00073R/09/
Service-specific accessories
Accessories Description
Applicator Software for selecting and sizing Endress+Hauser measuring devices:
• Calculation of all the necessary data for identifying the optimum measuring
device: e.g. pressure loss, accuracy or process connections.
• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and
parameters over the entire life cycle of a project.
Applicator is available:
• Via the Internet: https://wapps.endress.com/applicator
• On CD-ROM for local PC installation.