EasyManua.ls Logo

Endress+Hauser RIA15 - Input Channels

Endress+Hauser RIA15
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RIA15
12 Endress+Hauser
EAC mark
The product meets the legal requirements of the EEU guidelines. The manufacturer confirms the
successful testing of the product by affixing the EAC mark.
Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, etc.) can be supplied by your E+H
Sales Center on request. All explosion protection data are given in a separate documentation which
is available upon request.
Functional safety
SIL interference freeness according to EN61508 (optional)
Marine approval
GL marine approval (optional)
HART
®
communication
The display unit is registered by the HART
®
Communication Foundation. The device meets the
requirements of the HART
®
Communication Protocol Specifications, May 2008, Revision 7.1. This
version is downwards compatible with all sensors/actuators with HART
®
versions ≥ 5.0.
Other standards and
guidelines
IEC 60529:
Degrees of protection provided by enclosures (IP code)
IEC 61010-1: 2010 cor 2011
Safety requirements for electrical equipment for measurement, control and laboratory use
NAMUR NE21, NE43
Association for Standards for Control and Regulation in the Chemical Industry
Ordering information
Detailed ordering information is available from the following sources:
In the Product Configurator on the Endress+Hauser website: www.endress.com -> Click "Corporate"
-> Select your country -> Click "Products" -> Select the product using the filters and search field ->
Open product page -> The "Configure" button to the right of the product image opens the Product
Configurator.
From your Endress+Hauser Sales Center: www.addresses.endress.com
Product Configurator - the tool for individual product configuration
Up-to-the-minute configuration data
Depending on the device: Direct input of measuring point-specific information such as
measuring range or operating language
Automatic verification of exclusion criteria
Automatic creation of the order code and its breakdown in PDF or Excel output format
Ability to order directly in the Endress+Hauser Online Shop
Accessories
Various accessories, which can be ordered with the device or subsequently from Endress+Hauser, are
available for the device. Detailed information on the order code in question is available from your
local Endress+Hauser sales center or on the product page of the Endress+Hauser website:
www.endress.com.

Other manuals for Endress+Hauser RIA15

Related product manuals