To Next Page
W
Wayne LongAug 1, 2025
What to do if I forgot the password for my Eneo Keyboard?
- Eelizabeth47Aug 1, 2025
If you've forgotten your password, you should consult your supplier, distributor, or service center for assistance.
What to do if I forgot the password for my Eneo Keyboard?
If you've forgotten your password, you should consult your supplier, distributor, or service center for assistance.
Why my Eneo Keyboard joystick controller doesn't work with Multiplexer & DVR?
If the joystick controller isn't working with the Multiplexer & DVR, verify that the data cable for the multiplexer has the correct Pin configuration (1=1, 2=2, 3=3 ... 8=8). Also, check the communication menu of the Multiplexer.
How to fix Eneo Keyboard joystick if it can’t control the system?
If the joystick isn't controlling the system, check that the dome camera IDs are set properly and the polarity of the data line.
What to do if the camera number does not match the multiplexer number on my Eneo KBD-2?
If the camera number doesn't match the multiplexer number, check the camera ID and ensure the BNC cable is inserted into the correct input of the multiplexer.
Illustrates the fundamental wiring and connection setup for a Fastrax dome camera system.
Provides a diagram and explanation for connecting and configuring the keyboard controller with a DVR system.
Details the installation and configuration steps for connecting the keyboard controller to a multiplexer (MUX).
Explains how to set up master and slave keyboard configurations for multi-keyboard operation.
Guides on configuring multiplexer settings, including ROM versions and operational modes like Duplex and Triplex.
Explains network settings, including J-BOX configuration, port setup, baud rates, and multiplexer configuration.
Details how to configure connected cameras, including setting camera IDs, protocols, and baud rates.
Details how to control multiplexers using the keyboard, including selecting multiplexers and cameras.
Details the installation and setup of the DVR5 protocol for DVRs version 3.1.0 and later.
Illustrates the fundamental wiring and connection setup for a Fastrax dome camera system.
Provides a diagram and explanation for connecting and configuring the keyboard controller with a DVR system.
Details the installation and configuration steps for connecting the keyboard controller to a multiplexer (MUX).
Explains how to set up master and slave keyboard configurations for multi-keyboard operation.
Guides on configuring multiplexer settings, including ROM versions and operational modes like Duplex and Triplex.
Explains network settings, including J-BOX configuration, port setup, baud rates, and multiplexer configuration.
Details how to configure connected cameras, including setting camera IDs, protocols, and baud rates.
Details how to control multiplexers using the keyboard, including selecting multiplexers and cameras.
Details the installation and setup of the DVR5 protocol for DVRs version 3.1.0 and later.
General| Brand | Eneo |
|---|---|
| Model | KBD-2 |
| Category | Keyboard |
| Interface | USB |
| Key Type | Membrane |
| Number of Keys | 104 |
| Backlight | No |