13
9. If you wish to store your data into one of the 100
storage buffers of the analyzer, press the STORE
button.
10. When you are finished with the measurements,
remove the probe from the stack and allow it to reach
ambient temperature before storing it. Remove any
condensation from the water trap and replace the
fiber filter, if it is dirty.
ENERAC 500
Serial #: 000000
TEST RECORD
CUSTOMER NAME
Time: 10:25:00
Date: 07/11/00
Fuel: #2 OIL
Effic: 89.9 %
Amb Temp: 83 F
Stack T: 241 F
Oxygen: 0.2 %
CO: 43 PPM
CO2: 15.5 %
Combust: 1.5 %
Draft: -2.0 "
Ex.Air: 1 %
NO: 523 PPM
NO2: 25 PPM
NOX: 548 PPM
SO2: 35 PPM
Oxygen Ref:TRUE
TEST PRINTOUT
To Next Page
Loading...