Energic Plus LF5 - Page 39

39/44
Type.5– weekly MEDIUM
After charging is complete, the charger will wait 24 hours to allow the battery to cool down, after
which it will perform a 4-hour EQ cycle. After that, the charger goes into sleep mode for 6 days and
starts the recharge cycle for 4 hours.
Type.6– weekly HARD
After charging is complete, the charger will wait 24 hours to allow the battery to cool down, after
which it will perform a 6-hour EQ cycle. After that, the charger will go into sleep mode for 6 days and
refresh the battery for 4 hours.
Type.7– weekly ULTRA HARD
After charging is complete, the charger will wait 24 hours to allow the battery to cool down, after
which an 8-hour EQ cycle will be performed. After that, the charger goes into sleep mode for 6 days
and starts the recharge cycle for 6 hours.
Parameter 4: charge mode
• Programmable values:
• Blank/empty: Wa – finishing charge proportional 33%
• Red: Wa – finishing charge proportional 50% (default)
• White: Wa – finishing charge 2 hours
• Blue: Wa – finishing charge 3 hours
• Yellow: Wa – finishing charge 4 hours
• Purple: Wa – finishing charge 6 hours
• Cyan: desulphation mode
• Green: WSa-taper/pulsed
Wa– finishing charge proportional 33%
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 33% of the time spent in the first phase.
Wa– finishing charge proportional 50% (default)
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 50% of the time spent in the first phase.
Wa– finishing charge 2hours
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 2 hours.
Wa– finishing charge 3hours
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 3 hours.