Energic Plus LF5 - Page 40

40/44
Wa– finishing charge 4hours
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 4 hours.
Wa– finishing charge 6hours
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 6 hours.
Desulphation mode
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 12 hours.
WSa/pulsed
As soon as the charger reaches the battery’s voltage gassing point, the charger will start the final
phase.
The maximum time of the end phase is 8 hours.
The final phase consists of a high current step and a cooling step.
Parameters 5 to 8 are intentionally not shown as these are settings for the technician to adjust.
If you still have questions about these settings or think you have changed them by mistake,
contact your dealer.