22 23
5 METER VERIFICATION
Meter verification is carried out while manufacturing, after repair and while operating according to the
document «Single-phase multi-tariff active energy meter CE102. Verification procedure ИНЕС.411152.090 Д1».
ATTENTION: LITHIUM CELL REPLACEMENT IS RECOMMENDED AT THE TIME OF METER VERIFICATION
6 TECHNICAL MAINTENANCE
6.1 Meter technical maintenance in places of installation consists of systematic monitoring over the meter
operation, its time accuracy and monitoring of the secure network wires clamping.
6.2 Periodic meter verification is to be done according to procedure described in the paragraph 5 of the present
operation manual, every 16 years or after the repair
6.3 In case of malfunctions or negative results of verification the meter should be sent to repair. Meter repair
and adjustment is provided by authorized repairing organization.
6.4 Lithium battery replacement should be done according to the present User Manual.
7 STORAGE AND TRANSPORTATION
7.1 Meters storage is performed in the manufacturer packaging at an ambient temperature from 5 to 40 °С, the
relative humidity of 80% at the temperature of 25 °С.
7.2 Meters are to be transported in the closed vehicles of any kind.
Extreme conditions of transportation:
– ambient air temperature – from -50 to +70°C;
– relative humidity 98% at 35°C.
To Next Page
Loading...
