4
This operation manual (hereinafter – РЭ) contains decription of meter functioning principle and information
required to ensure the correct and safety operation of single-phase multi-tariff electricity meter CE102
(hereinafter – meter). Detailed technical parameters, information required to ensure the full use of its technical
capabilities and maintance is provided in the САНТ.411152.165 РП (hereinafter – User Manual), which is located
on the following Internet address www.energomera.ru/ru/products/meters/ce102r5_1.
Information about certificates, manufacturer warranties and factory settings is provided in the Technical
passport ИНЕС.411152.090 ФО (hereinafter – Technical passport).
Only persons who studied this operation manual are allowed to take meter readings.
1 SAFETY REQUIREMENTS
1.1 By the requirements of operating safety, the meter meets the safety requirements in accordance with
GOST 22261-94 and IEC 61010-1:2001.
1.2 By methods of person protection against electric shock, the meter corresponds to the class II
IEC 61010-1:2001.
1.3 The meter installation and operation should be carried on according to the actual rules of electric installation
technical operation.
2 APPLICATION AND OPERATING CONDITIONS
Meter is designed for active energy measurement in single-phase AC circuits, multi-tariff metering organization
and network parameters measurement.
The meter has communication interfaces and may be used both locally and in automated information and
measuring system of commercial energy metering (AMR system) for measured or calculated parameters
transmission to the electric energy control, metering and distribution dispatch center .
To Next Page
Loading...
