ENERdan GmbH | Max-Planck-Straße 7, D-12489 Berlin, Germany | www.enerpower.de
Tel: +49 (0) 30 5770 344 35 | Fax: +49 (0) 30 5770 344 39 | sales@enerdan.de
7
Step 5: Tightening the bolt
Tighten the bolt with 40N.m torque force. Please refer to Image 5.
Image 5
Step 6: Installing the arm-cranks
Using M8×14 bolts to install the arm-cranks. The locking torque is 40N.m.
Image 6
To Next Page
Loading...