16
3940011 12.12
b. Connecting to the Electronic Ignition
Connect the actuator to the 120V side of the transformer in the electronic ignition box. Connect the
endswitches to the mili-volt circuit as shown in Fig. 12.
4.3 XTP2 Connection
Wire the XTP2 Sensor in ‘exhaust mode’ to terminals 40, 41 and 39 of the EBC 30. See the Fig. 13 for
additional terminal detail.
DETAIL A
A
40 41 39
Fig. 12
Fig. 13
To Next Page
Loading...