ENFORCER SA-027WQ User Manual

ENFORCER 7-Day Timer
SECO-LARM U.S.A., Inc. 11
Programming (Continued)
Performing a System Test
NOTE: Performing the system test on a relay toggles that relay based on its current state. If the
relay is currently ON, pressing ENTER to test will toggle it OFF and vice versa. If currently
OFF, it would toggle to ON.
Clearing the Memory
Press ENTER to see the
following.
Se t to D ef a u l t
Su r e ? > N O
▓
<
The default is "NO." Press
SEL to toggle between
NO and YES.
If NO, Press ENTER at the
to return to the home
screen.
Press SEL until
>C l r M e m o r y <
appears.
If YES, Press ENTER to
accept. After 3~5 seconds,
the timer will return to the
home screen and the
memory will be cleared.
YES NO
Press ENTER to see the
following.
R1 > O F F <
R2 = O F F
Press ENTER to test relay 1
.
Press again to toggle
it to its
original state.
Press SEL to move to the
next and repeat previous.
R1 = O F F
R2 > O F F <
Press SEL to move to
and ENTER to return to the
home screen.
Press SEL until
>S y s t e m T e s t <
appears.

ENFORCER SA-027WQ Specifications

General

Brand	ENFORCER
Model	SA-027WQ
Category	Timer
Language	English