ENFORCER SK-1323-SPQ User Manual

ENFORCER Outdoor Stand-Alone Keypads
SECO-LARM U.S.A., Inc 13
Programming the Output #2 Timer
 01 to 99 is the number of seconds Output #2 will
activate.
DEFAULT: 1 second
5
Step 1
Step 2
Enter:
0
0
or
9
9
For toggle mode, enter:
For timed output, enter:
0
1
to
*SK-2323-SPQ and SK-1323-SPQ only.
Swipe a new user card.*
Deleting or Changing an Output #2 User
4
Enter:
Enter a user ID number.
to
0
0
0
9
 This option deletes Output #2 users one at a time.
 To delete all users, see page 14, Deleting All Users.
Step 1
Step 2
Step 3
Step 4
Delete existing user by entering:
Return to Programming Mode
by entering
or
or
X
X
X
X
Enter a new user code.
Programming the Output #1 Timer
DEFAULT: 1 second
1
0
0
or
9
9
Step 1
Step 2
Enter:
For toggle mode, enter:
For timed output, enter:
0
1
to
 01 to 99 is the number of seconds Output #1 will
activate.
Programming the Output #2 Function
2
 When Output #2 is programmed for doorbell, press
to activate doorbell. Doorbell output lasts 1 second.
DEFAULT: User codes
0
1
0
2
Step 1
Step 2
or
Enter:
For user codes, enter:
For doorbell, enter:
Output #2 can be activated via or through user codes.
Use the following steps to program its function.
Swipe a new user card.*
Return to Programming Mode
by entering
Deleting or Changing an Output #1 User
Step 1
Step 2
Enter a user ID number.
to
0
0
0
9
9
9
Delete existing user by entering:
Step 3
or
or
 This option deletes Output #1 users one at a time.
 To delete all users, see page 14, Deleting All Users.
X
X
X
X
Enter a new user code.
Additional Programming
Programming the Optical Tamper
6
0
1
0
2
Enter:
To turn optical tamper OFF, enter:
Step 1
Step 2
or
DEFAULT: OFF
To turn optical tamper ON, enter:

ENFORCER SK-1323-SPQ Specifications

General

Brand	ENFORCER
Model	SK-1323-SPQ
Category	Keypad
Language	English