EngA CenCon User Manual

CenCon
23
EXPANSION MODULES (XM)
The CenCon controller can be connected to any Engineered Air expansion module. The expansion module
provides the required wiring terminals for each additional appliance it is controlling.
All expansion modules have (2) lights. The Green light is indication of power, and the blinking yellow light is to
show communication to the CenCon is connected.
Expansion Module Engineered Air Appliance Type
J
-
XM
DJ (S, E, X) style indirect fired heating up to size 140.
G
-
XM
DG, and DJX indirect fired gas burners, sizes 200 and 300.
M
-
XM
H
E direct fired gas heating.
H
-
XM
K binary
staged electric heating.
C
-
XM
FW, CU, UPW staged mechanical cooling.
ER
-
XM
Energy recovery Wheel, Pipe and Plate style energy recovery systems.
S
-
XM
SH and SHX gas fired humidification.
CD
-
XM
In addition to J
-
XM for DJ (E, S, X) burners up to size 140,
and SH(X) sizes 120
-
650
P
-
XM
In addition to M
-
XM for profile pressure sensing module on direct fired burners.

EngA CenCon Specifications

General

Brand	EngA
Model	CenCon
Category	Controller
Language	English