Engcon PP3200 - Special Maintenance Procedures

6 Maintenance
WARNING
Welding is not permitted. It can have a negative
impact on safety. Risk of personal injury and damage
to property. For welding, contact your dealer or
engcon Nordic AB.
6.3. Special maintenance
6.3.1. EC-Oil
Cleaning
904097
- Clean oil connections, electrical
connectors, grease connections and
dirt guards before and after use in order
to avoid oil or grease leakage and
safeguard EC-Oil function.
- If oil or grease leakage occurs despite
cleaning, we recommend face seal
replacement.
- Clean electrical connectors daily and
spray with water repellent.
Figure 5. Bildtext
Guard
963760
During transport and extended layups, use
the protection supplied on the EC-Oil block.
Figure 6.
17