53
To set the number of cluster(s) per input:
- Turn the button to select Split UHF mode.
The LED is GREEN.
- Push the button to conrm.
The LED is RED.
- Turn the button to set one conguration:
- Push the button to conrm.
The LED is GREEN.
Notes: - UHF1 is set for 2 clusters, UHF2 and UHF3 are set for different number of cluster(s).
- Each cluster can be switched off (Park function). For example if you only need one cluster for UHF1,
set the second cluster on channel 00 to switch it off (see following paragraph “Setting channels /
cluster”).
SETTING CHANNELS / CLUSTER:
Each cluster has a bandwidth which can be programmed from 1 to 7 channels:
To set the channel(s) per cluster
In the following example cluster 1 is set for channel 22 to channel 26.
Split UHF
Split UHF
Split UHF
To Next Page
Loading...