Engel RT5130T2 - Parental and OSD Settings; Other System Settings

45
EN
Parentallock(Somermwareversionsdonotsupportthisfunction)
Menu Lock: When is enabled, the access to channel edition and searching
menu,willbeprotectedbyapassword.DefaultvalueisO.
RatingLock:Settheage.
NewPassword:Enternewpassword.
ConrmPassword:Conrmthenewpassword.
Note:DefaultPasswordis0000.ThereisalsoaPowerPIN,incaseofforgetting
thepasswordthatyouwereset.TheSUPERPINis1006.
OSDSetting
OSD Timeout:SelectthedurationofdisplayingInfo bar,from1to10seconds.
Thedefaultvalueis5.
OSD Transparency : Set the OSD transparency to O, or from 10% to 40%.
ThedefaultvalueisO.
Favorite
Press OK on a Favorite Group, Now you can rename the Favorite Channels List.
Other
Antennapower:SettoONwhenhavinganactiveantennawithoutpoweradap-
ter.SettoOFFwhenhavingpassiveantennaoractiveantennawithpoweradap-
ter.The defaultvalueisOFF.
ChannelPlayType:ThedefaultvalueisAll.
Beeper:ThedefaultvalueisO.
ADService:ThedefaultvalueisO.
UseADasdefault:ItisactivatedwhentheADServiceisOn.
ADVolumeOset:ItisactivatedwhentheADServiceisOn.
After Power Stop: Allows you to choose the action of the receiver at a sudden
power stop. The default value is Restart to Last Channel
SYSTEM SETUP