hellospoke.com 888 / 955 / 5155 EnGenius DuraFon
Handset Features
KEY GUARD
BATTERY RECHARGE AND REPLACEMENT
1. To prevent accidental dialing, you can press MENU (Right) soft key, then press “1” to select Key
Guard option. The handset keypad is now locked. No key entry is accepted.
2. To unlock the keypad, press UNLOCK (Left) soft key, then, within 2-seconds, press the digit
*
to
unlock.
3. Once returning back to standby mode for 15-seconds, the Key Guard will be automatically enabled.
4. Key Guard is in effect until unlocked.
1. Charge the battery when one or several of the following happen:
• Phone beeps twice (every 60-seconds in talk mode, every 10-minutes in standby mode).
• Battery icon is empty.
• Phone does not respond when the power ON/OFF key is pressed.
• LCD and backlighting become dim.
• Talk range shortfall is experienced.
2. You can replace the handset battery after placing the call-in-progress on hold and press the ON/OFF key.
To retrieve the call on hold, press Talk key again after replacing the battery and powering on the handset.
3. Battery talk time and standby times vary depending on the talk/standby pattern and the operating
distance. Putting the handset back on the charger cradle as often as possible is recommended for best
performance. Use only the manufacturer’s provided battery and charger!
To prevent accidental dialing, you can press MENU (Right)
soft key, then press “1” to select Key Guard option. The
handset keypad is now locked. No key entry is accepted.
To unlock the keypad, press UNLOCK (Left) soft key, then,
within 2-seconds, press the digit ＊ to unlock.
Once returning back to standby mode for 15-seconds, the
Key Guard will be automatically enabled.
Key Guard is in effect until unlocked.
Battery Recharge and Replacement
Charge the battery when one or several of the following happen:
Phone beeps twice (every 60-seconds in talk mode, every 10-minutes in
standby mode).
Phone does not respond when a power On/Off key is pressed.
LCD and backlighting become dim.
Talk range shortfall is experienced.
You can replace the handset battery after placing the call-in-progress on hold
and press key. To retrieve the call on hold, press Talk key again after
replacing the battery and powering on the handset.
Battery talk time and standby times vary depending on the talk/standby
pattern and the operating distance. Putting the handset back on the charger
cradle as often as possible is recommended for best performance.
Use only the manufacturer’s provided battery and charger!
To prevent accidental dialing, you can press MENU (Right)
soft key, then press “1” to select Key Guard option. The
handset keypad is now locked. No key entry is accepted.
To unlock the keypad, press UNLOCK (Left) soft key, then,
within 2-seconds, press the digit ＊ to unlock.
Once returning back to standby mode for 15-seconds, the
Key Guard will be automatically enabled.
Key Guard is in effect until unlocked.
Battery Recharge and Replacement
Charge the battery when one or several of the following happen:
Phone beeps twice (every 60-seconds in talk mode, every 10-minutes in
standby mode).
Phone does not respond when a power On/Off key is pressed.
LCD and backlighting become dim.
Talk range shortfall is experienced.
You can replace the handset battery after placing the call-in-progress on hold
and press key. To retrieve the call on hold, press Talk key again after
replacing the battery and powering on the handset.
Battery talk time and standby times vary depending on the talk/standby
pattern and the operating distance. Putting the handset back on the charger
cradle as often as possible is recommended for best performance.
Use only the manufacturer’s provided battery and charger!
To Next Page
Loading...
