EnGenius DuraFon - Safety Instructions; Battery Safety Instructions

hellospoke.com 888 / 955 / 5155 EnGenius DuraFon
Basic Call Handling
MAKING A CALL
MAKING A 2-WAY / INTERCOM CALL
There are 3 options for placing a call:
1. Press TALK, wait for dial tone, then enter the phone number.
2. Enter the phone number rst, then press the TALK key.
When using this method, you can use the CLEAR (Left) and DELETE (Right) soft keys to edit the number entered.
“Delete” erases the last digit entered. “Clear” erases the entire line but remains in the dial-and-send dialing.
3. Speed dial by accessing the entries in the phone book. (Menu g 2)
• Press the UP or DOWN scrolling key to enter the phone book.
• Press TALK to dial the number.
• To abort dialing, press the END key.
NOTES:
1. If a link cannot be established, the LCD will show “Base not found” after a 6-second time out.
2. A call duration timer will start displaying the length of the call after a link is established.
The DuraFon-SIP Cordless Phone System offers private, Intercom/ 2-Way Radio calls independent of
the base station. Intercom/ 2-Way communication can be placed between handsets.
1. Press the 2-WAY/INTERCOM key followed by a two-digit handset ID or Group ID.
2. Press END to end the call.
NOTES:
1. Intercom calls can be made regardless of the Base Station being present.
2. If a Group ID is entered, the rst handset (belonging to that group) that answers will establish a link
with the caller.
3. If a link cannot be established, the LCD shows “Paging timeout” after a 35-second time out.
~29~
Making a Telephone Call
1.
Press , wait for dial tone, then enter the phone
number.
11
Press REDIAL
or dial number
REDIAL MENU
L
1
2.
Alternatively, you can enter the phone number first, then
press key.
When using this method, you can use the CLEAR (Left) and
DELETE (Right) soft keys to edit the number entered.
“Delete” erases the last digit entered. “Clear” erases the
entire line but remains in the dial-and-send dialing.
432398765
CLEAR DELETE
3.
Speed dial by accessing the entries in the phone book.
(Menu2)
Main Menu
2.PhoneBook
SELECT BACK
Joe
033289289
ADD
OPTION
a.
Press or scrolling key to enter the phone
book.
b.
Press to dial the number.
4.
To abort dialing, press key.
Notes:
1. If a link cannot be established, the LCD will show “Base not found”
after a 6-second time out.
2. A call duration timer will start displaying the length of the call after
a link is established.
~29~
Making a Telephone Call
1.
Press , wait for dial tone, then enter the phone
number.
11
Press REDIAL
or dial number
REDIAL MENU
L
1
2.
Alternatively, you can enter the phone number first, then
press key.
When using this method, you can use the CLEAR (Left) and
DELETE (Right) soft keys to edit the number entered.
“Delete” erases the last digit entered. “Clear” erases the
entire line but remains in the dial-and-send dialing.
432398765
CLEAR DELETE
3.
Speed dial by accessing the entries in the phone book.
(Menu2)
Main Menu
2.PhoneBook
SELECT BACK
Joe
033289289
ADD
OPTION
a.
Press or scrolling key to enter the phone
book.
b.
Press to dial the number.
4.
To abort dialing, press key.
Notes:
1. If a link cannot be established, the LCD will show “Base not found”
after a 6-second time out.
2. A call duration timer will start displaying the length of the call after
a link is established.
~29~
Making a Telephone Call
1.
Press , wait for dial tone, then enter the phone
number.
11
Press REDIAL
or dial number
REDIAL MENU
L
1
2.
Alternatively, you can enter the phone number first, then
press key.
When using this method, you can use the CLEAR (Left) and
DELETE (Right) soft keys to edit the number entered.
“Delete” erases the last digit entered. “Clear” erases the
entire line but remains in the dial-and-send dialing.
432398765
CLEAR DELETE
3.
Speed dial by accessing the entries in the phone book.
(Menu2)
Main Menu
2.PhoneBook
SELECT BACK
Joe
033289289
ADD
OPTION
a.
Press or scrolling key to enter the phone
book.
b.
Press to dial the number.
4.
To abort dialing, press key.
Notes:
1. If a link cannot be established, the LCD will show “Base not found”
after a 6-second time out.
2. A call duration timer will start displaying the length of the call after
a link is established.
~29~
Making a Telephone Call
1.
Press , wait for dial tone, then enter the phone
number.
11
Press REDIAL
or dial number
REDIAL MENU
L
1
2.
Alternatively, you can enter the phone number first, then
press key.
When using this method, you can use the CLEAR (Left) and
DELETE (Right) soft keys to edit the number entered.
“Delete” erases the last digit entered. “Clear” erases the
entire line but remains in the dial-and-send dialing.
432398765
CLEAR DELETE
3.
Speed dial by accessing the entries in the phone book.
(Menu2)
Main Menu
2.PhoneBook
SELECT BACK
Joe
033289289
ADD
OPTION
a.
Press or scrolling key to enter the phone
book.
b.
Press to dial the number.
4.
To abort dialing, press key.
Notes:
1. If a link cannot be established, the LCD will show “Base not found”
after a 6-second time out.
2. A call duration timer will start displaying the length of the call after
a link is established.
~30~
Making a 2-Way/ Intercom Call
The DuraFon-SIP Cordless Phone System offers private, Intercom/ 2-Way Radio calls
independent of the base station. Intercom/ 2-Way communication can be placed
between handsets.
1.
Press key followed by a two-digit handset ID or
Group ID.
Enter Ext #:
##
PHBOOKBASE
2.
Press key to end the call.
Notes:
1. Intercom calls can be made regardless of the Base Station being
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “Paging timeout”
after a 35-second time out.
Making a Broadcast
Handset-to-Handset Calls
1.
Broadcasting to all handsets
11
PA to ALL
REDIAL MENU
a.
Press and hold key from one handset.
b.
Start speaking the broadcast message once you hear the key tone; the
speakerphone of destination handsets will open when it receives the voice.
Re: the initiating handset needs to press and hold key while
speaking or broadcasting.
c.
Release key to end broadcasting.
2.
Broadcasting to a group of handsets
11
PA to Group #91
REDIAL MENU
91
a.
Enter the Group ID and then press and hold