Need help?Do you have a question about the EnGenius EAP1200H and is the answer not in the manual?
General| Brand | EnGenius |
|---|---|
| Model | EAP1200H |
| Category | Wireless Access Point |
| Language | English |
Overview of the EAP1200H, highlighting its features, capabilities, and intended use in various environments.
Offers guidelines on optimal placement and environmental factors to maximize the EAP1200H's wireless signal strength.
Guides users on configuring TCP/IPv4 settings on Windows and Mac OS X for connecting to the Access Point.
Provides step-by-step instructions for physically connecting the EAP1200H, including cabling and power, and verifying LED status.
Details how to attach the EAP1200H to a ceiling or wall using the provided mounting bracket and hardware.
Explains accessing the EAP1200H's web interface using default IP address, username, and password.
Describes EAP1200H's function as a central connection point for wireless clients supporting IEEE 802.11 standards.
Explains using EAP1200H in WDS AP mode to wirelessly connect clients and enlarge wireless area with WDS technology.
Details wirelessly connecting different LANs using WDS Bridge mode for communication between wired networks.
Outlines the three operating modes of the EAP1200H: Access Point, WDS AP, and WDS Bridge.
Allows modification of device IP settings, including IP address, subnet mask, gateway, and DNS server configuration.
Details WEP, WPA-PSK, WPA2-PSK, and WPA-Enterprise security modes, recommending WPA2-PSK.
Manages user accounts, passwords, and security configurations for the access point, recommending strong password practices.
Provides instructions on how to upgrade the EAP1200H firmware by selecting and uploading a firmware file from a hard disk.
To Next Page
