Need help?Do you have a question about the EnGenius EAP1250 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Virtual LAN features | Tagged VLAN |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 867 Mbit/s |
| Internal | No |
| Placement | Ceiling, Wall |
| Certification | FCC, CE |
| Product color | White |
| Security algorithms | SSID, WEP, WPA, WPA2 |
| Number of SSID supported | 16 |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Antenna features | Integrated antenna |
| Antennas quantity | 2 |
| Antenna direction type | Omni-directional |
| Antenna gain level (max) | 5 dBi |
| Power over Ethernet (PoE) | - |
| Power consumption (typical) | 9 W |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Cables included | LAN (RJ-45) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Width | 130 mm |
|---|---|
| Height | 40 mm |
| Weight | 180 g |
Highlights high transmit power, 802.11ac support, and dual-band capabilities of the Access Point.
Details the device's standards, interfaces, power requirements, operating modes, security, and environmental conditions.
Guides users on setting up TCP/IPv4 on Windows and macOS for accessing the Access Point.
Covers connecting the Access Point physically and details mounting methods for ceiling or wall installations.
Specifies the default IP address, username, and password for initial access to the device.
Configures IPv4/IPv6 settings, including static IP, subnet mask, and gateway for the device.
Configures device name, band steering, 2.4/5GHz network parameters, channels, and bandwidth.
Implements security measures like WEP, WPA-PSK, and WPA-Enterprise for wireless network protection.
To Next Page
