EnGenius EAP1250 - Technical Specifications

9
L2 Isolation
802.1XAuthenticator(MD5/TLS/TTLS/PEAP)
Guest Network
QoS (Quality of Service)
WMM(WirelessMultimedia)
Wireless Management
Webinterface(HTTP/HTTPS)
SNMP v1/v2c/v3 with MIB I/II and private MIB
CLI(Telnet/SSH)
Firmware Upgrade
Backup/Restore Settings
SaveCongurationasDefault
Auto Reboot
E-mailAlert/SyslogNotication
Physical Security
Kensington Security Slot
Physical/Environment Conditions
Operating:
 Temperature:32°Fto104°F(0°Cto40°C)
 Humidity(Non-condensing):90%orless
Storage:
 Temperature:-4°Fto140°F(-20°Cto60°C)
 Humidity(Non-condensing):90%orless
Standard:
IEEE802.11b/g/n on 2.4 GHz
IEEE 802.11ac/a/n on 5 GHz
IEEE802.3at
Physical Interface
1x10/100/1000GigabitEthernetPort
1xResetButton
1xPowerConnector
LED Indicator
Power
WPS
WLAN(WirelessConnection)
LAN
Power Requirements
ExternalPowerAdapter
DCIN,12V/2A
ActiveEthernet(Power-over-Ethernet)
802.3at PoE Input
Operation Modes
Access Point
WDS AP
WDS Bridge
Repeater (Available in December, 2017)
Security
WEP(64/128bit)
WPA/WPA2(TKIP/AES)
Hidden SSID
MACaddressltering,upto32eldsperSSID
Technical Specications - EAP1750H