Need help?Do you have a question about the EnGenius EAP900H and is the answer not in the manual?
General| Model | EAP900H |
|---|---|
| Wireless Standards | IEEE 802.11 a/b/g/n |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Type | Internal |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| PoE | 802.3af |
| Mounting Options | Ceiling, Wall |
| Operating Temperature | 0 to 50 °C |
| Operating Modes | Access Point, WDS |
| Security | WPA/WPA2 |
Lists the primary features and advantages of the EAP900H access point.
Provides a comprehensive list of the EAP900H's technical specifications and operating conditions.
Details the physical connection steps, including Ethernet and power adapter setup for the EAP900H.
Guides users on securely mounting the EAP900H unit onto ceilings or walls.
Explains the specific procedure for mounting the EAP900H on T-rail systems often found in drop ceilings.
Outlines the process of setting up the EAP900H via its web-based configuration interface.
Describes the primary function of the EAP900H as a central wireless access point.
Explains how to use the EAP900H in WDS AP mode to extend wireless network coverage.
Details the WDS Bridge mode for wirelessly connecting separate wired LAN segments.
Details the different operational modes available for the EAP900H (AP, WDS AP, WDS Bridge).
Guides on setting static IP addresses or utilizing DHCP for the EAP900H's network configuration.
Explains the configuration of Spanning Tree Protocol to prevent network loops and ensure stability.
Provides settings for managing wireless network parameters, channels, and bandwidth.
Details how to configure and manage multiple SSIDs for both 2.4GHz and 5GHz bands.
Covers the setup of various wireless security protocols including WEP, WPA, WPA2, and Enterprise modes.
Allows administrative changes to the device, including username and password management.
Guides users through the process of updating the EAP900H's firmware for new features and security.
To Next Page
