EnGenius EAP900H - Wireless Network

32
This page displays the current status of the Wireless
settings of the EAP900H.
Access Point/WDS AP mode:
Wireless Mode: Supports 802.11b/g/n mixed mode in
2.4GHzand802.11a/nmixedmodein5GHz.
Channel HT Mode: The default channel bandwidth is 20/
40MHz.Thelargerthechannel,thebetterthetransmission
quality and speed.
Extension Channel: Select Upper or Lower channel. Your
selection may affect the Auto Channel function.
Channel/Frequency: Select the channel and frequency
appropriate for your country’s regulation.
Auto: Check this option to the enable the Auto-Channel
feature.
RTS/CTS Threshold:Speciesthethresholdpackagesize
for RTC/CTS. A small number causes RTS/CTS packets to be
sent more often and consumes more bandwidth.
Client Limits: Limits the total number of clients.
Aggregation: Merges data packets into one packet. This
optionreducesthenumberofpackets,butalsoincreases
packet sizes.
AP Detection: AP Detection can select the best channel to
use by scanning nearby areas for Access Points.
Current Prole: You can congure up to eight different
SSIDs (4 in WDS AP mode). If multiple client devices will be
accessingthe network,you can arrangethe devicesinto
SSID groups. Click Edittoconguretheproleandcheck
whether you wish to enable extra SSIDs.
Save: Click Savetoconrmthechanges.
Wireless Network