EnGenius EAP1250 - Wireless MAC Filtering

48
Wireless MAC Filtering is used to allow or deny network
access to wireless clients (computers, tablet PCs, NAS,
smartphones,etc.)accordingtotheirMACaddresses.You
can manually add a MAC address to restrict permission to
accessEAP1750H.Thedefaultsettingis:Disable Wireless
MAC Filter.
Note: Only applicable in Access Point and WDS AP mode.
ACL (Access Control List) Mode: Determines whether
network access is granted or denied to clients whose MAC
addresses appear in the MAC address table on this page.
Choicesgivenare:Disabled,DenyMACinthelist,orAllow
MAC in the list.
MAC Address: Enter the MAC address of the wireless client
youwishtocongurefor.
Add: Click Add to add the MAC address to the MAC Address
table.
Delete: Deletes the selected entries.
Save: Click Save to apply the changes.
Wireless MAC Filtering