Engineered Comfort Fan Coil Controller EZstat - Set the Time and Date

Installation and Operation Manual
●
Fan Coil Controller – EZstat
EC-EZstat
Date: 9-2014 Supersedes: NEW
Engineered Comfort reserves the right to change any information concerning product or specification without notice or obligation.
Page 19 of 36
Procedure Steps Display
Starng Display
1. Start at the temperature display.
2. Enter Password 2. The display changes to the MAIN menu display.
F
°
70
AUTO AUTO
Enter
SECURITY
ADMIN LEVEL
0 0 0 0
Select the
SCHEDULE
menu.
1. From the MAIN menu, press either the or buon to
select SCHEDULE.
2. Press Enter . The SCHEDULE menu opens.
3. Choose SET CLOCK and then press Enter . The SET Clock menu
opens.







Choose a clock
funcon to set.
Choose one of the features in the SET CLOCK menu to change the
date, me, or Daylight Saving Time (DST) seng.
• DATE—The current calendar date.
• TIME—Time is set according to a 12‑hour clock.
• UTC OFFSET—Enter the me oset, in minutes, between local
standard me and Universal Time Coordinated. The value of the
property ranges from ‑780 to +780 seconds. The me zones to
the west of the zero degree meridian are posive values; those
to the east are negave values. The value of the UTC Oset
property is subtracted from the UTC received in a UTC Time
Synchronizaon service request to calculate the correct local
standard me.
• DST ENABLE—Set to TRUE to enable Daylight
• Saving Time and FALSE to use standard me year around.
• DST AUTO—When set to TRUE, the EZstat automacally
calculates the start and end dates from relave dates. For
example, set DST START to the rst Sunday in March instead of a
calendar date.
• DST START and DST END—Enter the dates and me to begin
observing DST. If DST AUTO is set to TRUE the dates are relave;
if set to FALSE the date is a calendar date.









 6.4 Setthemeanddate
Seng the me and date requires entering Password 2.
If the EZstat is connected to a BACnet network that includes a me service master, the me and date are automacally
set to the network me and date.
 Setthemeanddate
NOTE