Need help?Do you have a question about the Engl E633 and is the answer not in the manual?
General| Power Output | 100W |
|---|---|
| Effects | Reverb |
| MIDI | Yes |
| Footswitch | Yes |
| Outputs | 1x 1/4", 1x XLR |
| EQ | 3-band |
| EQ Bands | 3 |
| Inputs | 1x 1/4" |
| Channels | 4 (Clean, Crunch, Lead 1, Lead 2) |
Describes the input jack and gain controls for clean and lead channels.
Explains Bass, Middle, Treble, Lead Presence, and Lead Volume knobs.
Details Master volume, Gain Boost, Clean/Lead channel switching, Stand By, and Power.
Highlights safety features and technical details on the protective panel.
Explains the Power Soak feature for selecting output power levels.
Details footswitch jacks for M.V.B./Reverb and Clean/Lead/Gain Boost.
Explains the main power connector and the location of fuses.
Describes FX Loop, Reverb Mix Level, and Headphone Output.
Details Line Outputs (Cab Sim, Pure Signal) and Poweramp Output for cabinets.
Lists output power, input sensitivity, output level, and power consumption.
Details fuse ratings, tube types, dimensions, and weight.
Advises on settings to avoid feedback and potential speaker damage.
Explains common background noise in tube amps and its causes.
Provides steps to diagnose fluctuating or dropping output volume.
Offers solutions for when the amp produces no or low sound from the speaker.
Guides on identifying and resolving humming noises from the speaker.
Instructions on how to contact ENGL support for assistance.
Advice on proper packaging for transport and shipping.
Diagram and explanation for connecting a TRS footswitch.
To Next Page