Technical Data
Output power:
Input sensitivity
Output level
Power consumption:
Fuses:
Important:
Tubes:
Logic control system:
System interfaces:
Dimensions:
Weight:
Input:
Effect Return:
SEND, level range:
Pre Out:
Line Out:
Mains fuse:
at 220/230/240 mains voltage
at 100/115/120 mains voltage
V1, V2, V3, V4:
V5:
V6, V7:
V8:
Consult Tube Map
to view tube array
Processor, software:
Memory:
MIDI:
Serial Amp Control:
approx. watts;
approx. 400 watts max.;
(2 amps slo-blo)
(4 amps slo-blo)
AT89C52 µC with internal 8K Flash Memory for
software source code; Upgradeable with
external Programmer;
EEPROM 93C66 for data retention;
Asynchronous data protocol according to the
MIDI standard;
Proprietary ENGL asynchronous data protocol
approx. (l x h x d);
approx. 27.95 x 11 x 11.4 in;
approx. 22,5
adjusted accordingly to 4, 8 and 16 ohms;
approx.
EL34, matched sets;
ECC83 F.Q., input tube;
Replace tubes with selected sets only!
MIDI program changes 0 - 127;
MIDI channels 1 - 16
Replace these with fuses of the same type
and rating only!
100
from -20 dB, nominal, max. 0 dB
from -20 dB nominal, max. 0 dB
from -20 dB to approx. 0 dB max.
-17 dB bis ca. + 3 dB max.;
0 dB at nominal power output;
ECC83 selected;
ECC83 standard;
MIDI controller #7, #14, #22, #24, #28, #29, #30
value 0 - 4 Function deactivated,
value >/= 5 Funktion activatedt;
71 x 28 x 29 cm
kg, 49.6 lb;
2 ATL
4 ATL
.
33
To Next Page
Loading...
