2.5 Display setting
If the default settings do not meet your needs, you can follow the steps below to customize your settings:
1. Enter the Personalization Settings Menu: Within 10 seconds of powering on, long press the menu button to enter the personalization settings menu.
2. Navigate the Personalization Settings Menu: Short press the or button to navigate through the menu items. The adjustable settings include: Unit Settings,
Brightness Settings, Auto Power Off Time, Wheel Size Information, Speed Limit Information, System Information, Battery Information, Power-On Password Settings,
and Restore Factory Settings.
3. Enter Parameter Adjustment Mode: Short press to select a setting. The parameter will begin to flash, indicating that it is ready to be adjusted. Short press
the or button to modify the selected parameter.
4. Save Settings and Return to the Menu: Long press (for 3 seconds) to exit and save the settings.
Descriptions of each menu item are provided below, with commonly used functions in bold:
Quick Start g uide
①
Backlight Brightness Settings: 01 represents the dimmest setting, 05
represents the brightest setting.
②
Metric/ Imperial Unit Settings (Union): Adjust speed and distance units. In
the unit settings menu, press the or button to switch between options. To
return to the settings menu, select
“
Exit
”
and short press . To toggle
between Km and Mile units, select
“
Km/Mile
”
and short press
③
Auto Power Off (Auto Off): The auto power-off time can be set within a
range of 00 to 90 minutes, with 00 representing no auto power-off. The default
is 5 minutes.
④
Wheel Size Information (Wheel Size): The adjustable wheel size range is 1 to
32 inches, with a default of 23 inches. It is not recommended to change this
setting.
⑤
Speed Limit Information (Speed Limit): The default speed limit is 25 km/h
(EU version) or 28 mph (US version). The EU version cannot be changed. The US
version can be adjusted, but any setting above 28 mph is invalid.
⑥
Auto Lamp
：
When this function is switched on, the headlights turn on
automatically in dark situations.
⑦
System Information ( System Info): Displays software and hardware
information. It is not recommended for users to modify this setting.
⑧
Battery Information ( Battery Info): In the battery information menu, short
press to return to the settings menu.
⑨
Power-On Password Settings ( Password): You can change or disable the
power-on password (the default setting is off). To enter the power-on
password settings, press the or button to toggle between options. Short
press to select OFF/ON, which will either disable or enable the power-on
password. If you wish to set a password, select ON and enter the desired
password. Short press to move between digits from left to right, and use
the or button to adjust the values. After setting the password, select Exit
to save the settings and return to the previous menu.
M
M
M
M
M
MMM
MM
M
To Next Page
Loading...