00-02-0796 - 30 - 2013-04-08
Set Source Address
Allows setting the source claim address for the PowerView
on the CAN Network. Options are Auto Claim or 0 to 253.
Restore All Defaults
PowerView automatically resets after the restore defaults
is complete. RESTORING ALL FACTORY DEFAULTS
displays when this is selected.
Clear Machine Hours
Use this to clear machine hours internal to PowerView
outside of ECU hours.
Set Machine Hours
Machine hours calculate internally when the RPM is greater
than 50 and the engine is not broadcasting hours. Use this if
you want to track hours for just the machine.
To Next Page
Loading...