00-02-0796 - 31 - 2013-04-08
Fuel Setpoints
Highlight and press Enter to select Fuel Setpoints.
1) Press Enter to turn Fuel Setpoints ON or OFF.
2) Choose Set Empty Setpoint, Set Fuel Setpoint,
Show Fuel Setpoints, Clear Fuel Setpoints, or
choose to set ¼, ½ and ¾ fuel points.
Fuel Setpoints must be ON to work with a non-Murphy fuel
sender. Modifying fuel setpoints is a complex process. To
configure for a Murphy Fuel Sender or program for a non-
Murphy Sender, find document #1110833, PowerView –
Model PV101-C V3.2 Fuel Sender Calibration on the FW
Murphy Web site at www.fwmurphy.com/pv101.
DPF Regen Menu ON/OFF
Highlight and touch Enter to turn this option ON or OFF.
Turn this option ON to have it available in the Main menu or
OFF for no availability in the Main menu.
To Next Page
Loading...
Need help?
General
