00-02-0997 17 2016-06-15
2. Tachometer Area: The tachometer is the most important
reading and is shown in the largest gauge form that will fit
the screen. This represents the Engine speed with an
option to choose a 3000, 4000 or 6000 RPM dial (See
Customizing the Display on page 36 for more
information).
3. Parameter Area: The following parameters are the
electronic engine defaults until other parameters are
selected from the menu. Only the second screen, areas
3 through 6 may be changed:
• Engine Oil Pressure (numeric)
• Engine Temperature (numeric)
• Battery Voltage (numeric)
• Fuel Level (numeric)
• 2 – DEF Level (Tier 4 only) or target speed when
DPF/SCR is disabled (see Note on next page)
• Target Speed – appears on screen for 5 seconds
when the user throttles the engine (see arrow
below)
To Next Page
Loading...
