Enovation Controls Murphy PowerView PV380-R2 - Regen (Regeneration Process)

00-02-0997 26 2016-06-15
Regen
Follow these steps to initiate a Regen:
1. Press
to display the Menu.
2. Press to Regen. Press
to enter.
3. Press
once more on Request DPF Regen.
4. In answer to the question “Request Diesel Particulate
Filter Regen?” use Key 3 for Yes and Key 5 for No.
Follow these steps to change the Regen mode:
1. Press
to display the Menu.
2. Press to Regen. Press
to enter.
3. Press to Regen Mode.
4. Press to scroll through the available choices of
Auto or Inhibit. N/A will only appear on non-Tier 4
engines.
5. Press
to return to the Menu.