Enovation Controls Murphy PowerView PV380-R2 - Engine and Transmission Parameters; Navigation and Keypad Functions

00-02-0997 6 2016-06-15
Engine and Transmission Parameters
The following are some of the engine and transmission
parameters that can be displayed in standard units.
• Engine Speed
• Engine Temperature
• Engine or Machine Hours of
Operation
• Total Machine Hours
• Battery Voltage
• Coolant Temperature
• Engine Oil Pressure
• Engine Fuel Level
• Discharge Pressure
• Suction Pressure
• Diesel Exhaust Fluid (DEF)
Level (Tier 4 only)
• Active Fault Codes
• Stored Fault Codes
Navigation and Keypad Functions
The keys on the keypad are as follows: