00-02-0997 45 2016-06-15
Press the and to scroll through additional
messages if any are present. Each saved code shows
the SPN (Suspect Parameter Number), FMI (Failure
Mode Identifier) and OC (Occurrence Count). The OC
indicates if the same fault occurred more than once. If
available, a text explanation of the Warning or
Shutdown and the Device ID Address also displays.
To view the Stored Codes, press Stored Codes.
Stored codes are requested from the ECU. While the
data is being requested, REQUESTING and
RECEIVING DATA will be displayed. If data is not
received from the ECU, TIMEOUT will be displayed.
Pressing Stored Codes once more will request
data from the ECU again. If data is received, the
Diagnostic Message screen (#) of (#) will appear.
Press the
and to scroll through additional
messages, if any are present. Press Get Faults to
receive additional Stored Faults. Press
to return
to the Faults screen.
To Next Page
Loading...
