IQ 7 / IQ 7+ / IQ 7X / IQ 7A with EN4 Bulkhead Installation and Operation
© 2020 Enphase Energy Inc. All rights reserved. 141-00047-01
Enphase Microinverter Installation
Installing the Enphase IQ Series Micros involves several key steps. Each step listed here is detailed in
the following pages.
Step 1: Position the Enphase Q Cable
Step 2: Position the Enphase Q Aggregator or Junction Box
Step 3: Mount the Microinverters
Step 4: Create an Installation Map
Step 5: Manage the Cabling
Step 6: Connect the Microinverters
Step 7: Terminate the Unused End of the Cable
Step 8: Complete Installation of the Enphase Q Aggregator or Junction Box
Step 9: Connect the PV Modules
Step 10: Energize the System
To Next Page
Loading...
