10 Specifications
10.1 Technical data
Mains voltage: 100 – 240 V
Mains frequency: 50-60 Hz
Maximum power: 50 VA
Main fuses: 2 x T1H250V
Dimensions: 30 x 34 x 22 cm (b x d x h)
Weight: 10 kg
Environmental conditions for transport and storage
Temperature: -10° to +70° C
Relative humidity: 10 to 90 % (non condensing)
Atmospheric pressure: 500 to 1060 hPa
Environmental conditions for normal use:
Temperature: 10 to 40 °C
Relative humidity: 10 to 90 % (non condensing)
Atmospheric pressure: 500 to 1060 hPa
Technical modifications reserved
10.2 Safety and Performance standards
Medical device classification IIa
This equipment complies with all essential requirements of the Medical Device Directive
(93/42/EEC).
I
Safety class I (IEC 60601-1)
The unit is equipped with a safety earth and must be connected to a mains plug with
earth contact.
Type B
The leakage current and safety earth correspond to standard IEC 60601 -1.
10.3 EMC details
Medical electrical devices such as the Eltrac 471 are subject to special precautions with regard to
electromagnetic compatibility (EMC) and must be installed and commissioned in accordance with the
EMC advice given in the instructions for use and accompanying documents.
Portable and mobile RF communication systems (e.g. mobile phones) may interfere with medical
electrical devices.
The Eltrac 471 should only be operated with the original mains cable specified in the list of contents
delivered.
Operating the device with any other mains cable can lead to increased emissions or reduced interference
immunity of the device.
To Next Page
Loading...
Need help?
General
