11
For customer support, visit www.ergomotion.com or call: 1-844-534-3676
STEP 1 STEP 2
In the event that the base is stuck in an articulated position during a power outage- the Power Down Box will re-
turn the base to a flat position.
(2) 9 Volt batteries are required to operate the power down feature and are NOT included.
Locate the Power Down Box
under the base.
Press and hold the button
until the base is flat.
For emergency use only.
The Power Down Box can only be used to bring the base to a flat position. It will not bring the base to a flat position when the base is
connected to a working power source.
power down box
To Next Page
Loading...
