FUNCTION AND VISUAL INSPECTION
CLEANING
The best way to remove dust and dirt from the EM SL is to use water and a soft cloth or a sponge.
A gentle detergent maybe used. To maintain thequality of the surface treatment, the surfacesshould be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the
brushes/weather stripping must be vacuum-cleaned weekly.
• Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
• Do not clean with high pressure water. Operator, mode selector and sensor may be damaged and water
may enter the profiles.
• Do not use polishing detergent.
• Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
1005274-EMen-9.0Issue 2019-06-2814
To Next Page
Loading...
