Option b. Put the open parts of the extension cable into the plug and use
the plug to connect to the socket
Step 8. Connect PV modules to microinverters
Mount the PV modules on top of the microinverters; Connect each PV
module with the DC input cables of the microinverter.
Step 9. Switch on the PV system
Ensure all connection is completed and then turn on the air switch.
For the monitoring system (EnverBridge) installation please scan this
QR
code
.
EnverBridge Installation
Step 10. WI-FI Configuration
Option
1. Use EnverView app to configure Wi-Fi
Note: Please place the EVT400 as close as possible to the router.
The EVT400 has built-in WI-FI modular which is able to connect the router
directly.
Web Portal address: https://www.envertecportal.com/
To access our application, you can scan the QR code provided below or search
for 'EnverView' on Google Play Store or Apple Store for download.
a. Open EnverView app and click Wi-Fi. Select “EVT” to connect.
b. Select a 2.4GHz Wi-Fi network, and return to the app. Then enter the password
To Next Page
Loading...
Need help?
General
