Enviro EF-III BAY I FS User Manual

MODEL FS (FREESTANDING) INSTALLATION
PEDESTAL INSTALLATION:
Model FS comes with a pedestal that has to be attached prior to
installation:
- Remove the pedestal from the box
- Remove the ENVIROFIRE heater form the box.
- Place the unit on its back, making sure not to damage the
wiring.
- Back off the screws on the base, install the pedestal over
the screws.
- Lock pedestal in place using the keyholes, tighten the
screws. Return unit to upright.
INSTALLATION
KEYHOLES HERE
18

Enviro EF-III BAY I FS Specifications

General

Brand	Enviro
Model	EF-III BAY I FS
Category	Pellet stove
Language	English