Need help?Do you have a question about the Enviro EF-II I and is the answer not in the manual?
General| Brand | Enviro |
|---|---|
| Model | EF-II I |
| Category | Pellet stove |
| Language | English |
Explains safety features like auto shut-off and fan control override.
Procedures for safely shutting down the pellet stove.
Instructions on how to use the scraper rod for cleaning.
Maintaining ash pan and door gaskets for airtightness.
Instructions for cleaning the burn pot and liner.
Procedure for removing ash from insert models.
Managing ash from the freestanding unit's ash pan.
Lubrication and maintenance of blower motors.
Controls the speed of the convection blower.
Indicator light for stove temperature status.
Function of the auto/manual mode switch.
Controls heat output and pellet consumption.
Describes the convection blower's function.
Role of the combustion/exhaust blower.
How the auger motor feeds pellets.
Controls auger motor switching.
Safety device for overheating protection.
Controls convection blower speed based on temperature.
Shuts stove off when exhaust temp drops below 120°F.
Turns igniter off when exhaust channel temp reaches 120°F.
Heating element used to ignite the fuel.
Safety device detecting vacuum in the exhaust system.
Specifies requirements for safe and proper vent termination.
Provides physical dimensions of the stove unit.
Specifies required clearances from combustible materials for FPI.
Lists the physical dimensions of the fireplace insert.
Details the different sizes available for face plates.
Details clearances for the BIH model to combustibles.
Specifies clearances for freestanding installations.
Provides dimensions for alcove installations.
Instructions for attaching the pedestal to the stove.
Steps to troubleshoot when the stove fails to power on.
Steps to troubleshoot when the stove does not ignite.
Troubleshooting for the stove not operating correctly in auto mode.
Steps to diagnose issues with the exhaust blower.
Steps to diagnose issues with the convection blower.
Troubleshooting steps for a non-functional auger motor.
Diagnosing issues when the Dial-A-Fire control is unresponsive.
Steps to troubleshoot when the stove fails to shut off properly.
Diagnosing reasons for the stove repeatedly shutting off.
Troubleshooting steps for a malfunctioning ignitor.
To Next Page
