EasyManua.ls Logo

Enviro WINDSOR User Manual

Enviro WINDSOR
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
50-038
PELLET STOVE
WINDSOR
SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED
PAPER.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
OWNER’S MANUAL
PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION
AND USE OF THIS PELLET-BURNING ROOM HEATER. FAILURE TO
FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY
DAMAGE, BODILY INJURY OR EVEN DEATH.
Contact your building or fire officials about restrictions and installation
inspection requirements in your area.

Other manuals for Enviro WINDSOR

Question and Answer IconNeed help?

Do you have a question about the Enviro WINDSOR and is the answer not in the manual?

Enviro WINDSOR Specifications

General IconGeneral
Hopper Capacity60 lbs
IgnitionAutomatic
ThermostatYes
Fuel TypePellet
Venting3" or 4"

Summary

Introduction to Enviro Pellet Stove Operation

Important Safety Data

Emphasizes reading the manual, obtaining permits, and contacting officials for installation requirements.

Safety Warnings and Recommendations

Lists crucial safety advice, including not connecting to air ducts and keeping clear of hot surfaces.

Operating Instructions for Enviro Pellet Stove

Automatic Safety Features

Lists safety features like auto shut-off for fire loss, high-temperature switch, and vacuum switch monitoring.

Control Board Functions

Details functions of buttons (Auger Trim, Manual Feed, ON/OFF) and indicators (Heat Level, System Light).

Operating Your Pellet Stove

Provides step-by-step instructions for starting and operating the stove in manual mode.

Routine Cleaning and Maintenance Schedule

Burn Pot and Liner Cleaning

Detailed guide for removing, inspecting, and cleaning the burn pot and liner.

Installation Procedures for Enviro Windsor Stove

Locating Your Pellet Appliance

Guidelines for choosing a safe and optimal location, considering clearances and room layout.

Vent Termination Requirements

Specifies minimum clearances and allowable locations for exterior vent terminations.

Slider/Damper Setting for Airflow Regulation

Instructions for setting the slider/damper to regulate airflow for proper combustion.

Troubleshooting Common Pellet Stove Issues

Stove Will Not Start Troubleshooting

Steps to diagnose and resolve issues when the stove fails to start.

Stove Will Not Operate When Hot Troubleshooting

Steps to diagnose issues when the stove operates but fails to maintain heat.

Exhaust Motor and Vacuum Issues

Diagnosing and fixing exhaust motor problems and flashing light codes related to vacuum.

High Limit Sensor and Blower Issues

Diagnosing and fixing high limit sensor trips and convection blower malfunctions.

Ignition and Control Setting Problems

Troubleshooting ignitor failures and unresponsive control settings.

Wiring Diagram

Warranty Information and Claim Procedures

Related product manuals