Need help?Do you have a question about the Enviro EF-V EVOLUTION and is the answer not in the manual?
General| Brand | Enviro |
|---|---|
| Model | EF-V EVOLUTION |
| Category | Pellet stove |
| Language | English |
Details P.F.I. standards for wood pellets, covering fines, bulk density, size, ash, moisture, and heat content.
Details automatic safety features including shutdown below 120°F, high temperature safety switch, and power outage restart behavior.
Guidance on selecting a suitable location, considering clearances, ventilation, and room placement for the pellet appliance.
Provides detailed physical dimensions for the pellet stove, including front, side, and top views, and hearth pad measurements.
Instructions on how to safely remove the pellet stove unit from its shipping pallet, detailing panel removal and screw locations.
Steps for installing the hearth pad and securing the pellet appliance, including leveling leg adjustments for stability.
Specifies minimum clearances for vent termination from doors, windows, buildings, grade, overhangs, and combustible materials.
Details required clearances from the unit to side walls, back walls, and adjacent walls for safe installation.
Specifies minimum width, height, and depth clearances when installing the unit within an alcove.
Step-by-step guide for venting the pellet stove directly through an exterior wall without a vertical rise.
Instructions for routing the vent pipe through the ceiling and roof, including fire stops, clearances, and rain cap placement.
Lists the components included in the optional exterior mounted exhaust blower kit.
Instructions for removing the left side panel and back grill to access the exhaust system for blower installation.
Details on installing the exhaust blower housing, ensuring gasket integrity, and creating a watertight seal with silicone.
Procedures for connecting the vent pipe through the wall thimble and maintaining clearances for the completed exhaust blower setup.
Important notes on sealing vent connections with silicone and ensuring proper support for vertical vent sections.
Instructions for installing electrical cable from the exhaust blower housing to the power source, following local codes.
Step-by-step guide on starting the pellet stove, including filling the hopper, power on, and setting heat output via knobs.
Procedure for safely shutting down the pellet stove by turning the heat output knob to the "OFF" position.
Explains the slider damper's role in regulating airflow and provides instructions for its adjustment based on flame characteristics.
Highlights the impact of pellet quality, moisture, and ash content on stove efficiency and potential clinker formation.
Lists components requiring periodic inspection for optimal performance, categorized by frequency (days/week vs. season/tons).
Instructions for maintaining the ash pan and door gaskets, emphasizing airtightness and proper gasketing glue.
Detailed steps for removing, cleaning, and reinstalling the burn pot liner and burn pot, including ignitor alignment.
Guidance on removing, emptying, and disposing of ashes from the freestanding ash pan, and monitoring ash levels.
Information on cleaning and recommended replacement procedures for the high-temperature PYRO CERAMIC door glass.
Advises periodic inspection of the fresh air intake to ensure it is free from foreign material blockage.
Instructions for cleaning exhaust passages, including firebox backing removal and vacuuming, and cleaning the exhaust vent pipe.
Details on using a handle to clean fly ash from heat exchanger tubes, emphasizing regular cleaning for efficiency.
Recommendations for cleaning and servicing the stove after the season, including unplugging for electrical protection.
Describes the function of the power cord outlet for main supply and the convection blower for room air circulation.
Explains the roles of the start-up timer, timing control module, and auger motor in the stove's operation sequence.
Details the igniter for fuel ignition and the Dial-A-Fire knob for controlling heat output and auger motor timing.
Describes the convection fan controller, manual reset temperature sensor, and various shut-down temperature sensors and their functions.
Explains the functions of the exhaust blower, vacuum switch safety device, and thermostat interface for external control.
Provides steps to diagnose and resolve issues when the pellet stove fails to start, checking power, connections, and switches.
Addresses problems with the stove not operating when hot and troubleshooting the exhaust blower's functionality.
Guides on diagnosing issues with the convection blower not functioning and the igniter failing to light pellets.
Troubleshooting steps for the auger motor not functioning and the Dial-A-Fire control having no effect on the fire.
Explains how to test the Dial-A-Fire potentiometer's resistance range for proper function.
Addresses problems with the stove not shutting down correctly or repeatedly going out, checking sliders and cleaning.
Steps for diagnosing and resolving issues with the thermostat interface not working correctly, including continuity checks.
Outlines the procedure for filing a warranty claim, including required information for the dealer and distributor.
Details warranty limitations, exclusions, and responsibilities for do-it-yourself installations and consumer-caused damage.
To Next Page
