Enviro EF-V EVOLUTION User Manual

10
EXHAUST AND FRESH AIR INTAKE DIMENSIONS
MOBILE HOME INSTALLATION
- Secure the heater to the floor using the two holes in the pedestal. Do not disturb the structural integrity of
the home.
- Ensure the unit is electrically grounded to the chassis of your home (permanently).
- Do not install in a room people sleep in.
- Outside fresh air is mandatory.
OUTSIDE FRESH AIR CONNECTIONS
Outside fresh air is mandatory when installing this unit in airtight homes and mobile homes. When
connecting to an outside fresh air source, do not use plastic, combustible pipe. Only 2” ID (inside diameter) steel,
aluminum or copper pipe should be used. It is recommended, when you are installing a fresh air system, to keep
the number of bends in the pipe to a minimum.
EXTERNAL MOUNTED EXHAUST BLOWER.
(A)
Base to center of flue 8.36 inches (21.34 CM)
Side to center of flue 8.16 inches (20.72 CM)
INTERIOR MOUNTED EXHAUST BLOWER.
(B)
Base to center of flue 10.71 inches (27.20 CM)
Side to center of flue 10.62 inches (26.97 CM)
FRESH AIR INTAKE.
Base to center of intake 8.47 inches (21.51 CM)
Side to center of intake 7.97 inches (20.54 CM)
(A)
(B)

Enviro EF-V EVOLUTION Specifications

General

Brand	Enviro
Model	EF-V EVOLUTION
Category	Pellet stove
Language	English