Enviro Series D - Filter Replacement

ENVIRO-TEC
19
FORM ET115.24-NOM11 (118)
FILTERS, THROWAWAY
The type of throwaway lter most commonly used on
fan coil units should be replaced on a regular basis.
The time interval between each replacement should be
established based on regular inspection of the lter and
should be recorded in the log for each unit. Refer to the
chart below for recommended lter size for each product
type and size. If the replacement lters are not purchased
from the factory, the lters used should be the same type
and size as that furnished from or recommended by the
factory. Consult the factory for applications using lter
types other than the factory standard or optional product.
Figure 7a-7d: Filter removal
Figure 7a
Figure 7b
Figure 7c
Figure 7d