MAINTENANCE
ISOLATE THE UNIT FROM ELECTRICAL MAINS SUPPLY BEFORE REMOVING ANY
COVER, OR SERVICING THE UNIT.
All repair, maintenance and component replacement is carried out simply and quickly by exchanging the plug
out/plug in central cartridge.
The worn out cartridge can then be returned to the EnviroVent factory to be recycled/reworked.
This ‘when necessary’ cartridge exchange – with re-worked components will ensure that the basic fan
installation will remain intact throughout the repair cycle of the dwelling, eliminating the wasteful disposal of
plastic and other non biodegradable material to landll sites.
CLEANING
Your Filterless Extract Fan has been designed for easy safe cleaning.
1. Isolate from mains.
2. Remove front cover. (Fig.1)
3. Pull the front cover towards you from the
bottom. It will pull towards you with a slight
hinge action from the top.
4. Push the impeller clips together with forenger
and thumb and pull the impeller towards you.
(Fig.2)
5. Wash the cover and impeller in warm soapy
water. Dry and replace as above in reverse.
(Fig.3)
6. N.B. Use damp, soapy cloth to clean scroll (NO
solvents).
Fig.3
Fig.2
Fig.1
To Next Page
Loading...
