ENVO D50 - Component Torque Specifications; Final Assembly Checklist

ENVO D50 | ST50 EBIKE MANUAL | VERSION 1.0 26
Fasteners must be tightened correctly. Fasteners are not secured if the torque is too little,
and the fasteners can deform, stretch, or break if the torque is too much. Incorrect torque
can lead to component failure resulting in serious injury or even death.
4.7. ASSEMBLY CHECKLIST
It is important to complete the following checklist before your rst ride to ensure that bike is
assembled correctly:
 Handlebar aligned correctly
 Pedals are correctly installed
 The seat post is installed and its height adjusted
 Front-wheel installed and aligning with handlebar correctly
 The front and Rear brakes working
 Tires are inated and up to correct pressure
 Lights and Reectors connected
4.6. TORQUE CHART
COMPONENT TORQUE
Front wheel Axle Quick Release closed cam system
Rear Hub locking nut 15 Nm
Pedal 15 Nm
Kickstand 7 Nm
Clamps for fender 7 Nm
Stem bolt 7 Nm
Handlebar bolts 5 Nm