EasyManua.ls Logo

ENVO D50 - Initial Battery Charging

ENVO D50
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENVO D50 | ST50 EBIKE MANUAL | VERSION 1.0 8
Do not use the ENVO battery charger for any purpose other than charging your ebike. Do not
use the ENVO battery as a power source for any other devices than your ENVO ebike. If you
do so the warranty will not be applicable, and ENVO Drive Systems will not be liable for any
damage to the system or injury to the persons.
2.5. FIRST CHARGE
When you rst receive your battery it will have about 50-70% of charge
Before your rst ride, charge your battery up to 7-9hrs, but no longer than that
This may require you to leave the battery in charge even when the charger light is green. Doing so
ensures that each cell is charged to its full capacity
The full voltage of the battery pack should be slightly under 54V, and can be checked in the LCD
display
Do not drop the battery. Damaged batteries can cause re and may explode which can lead
to damaged property, injury or even death.
Do not puncture or crush the battery. Do not expose the battery to severe vibrations or impacts.
Failure to properly use, charge, and store your battery as instructed will void the warranty and
could cause a hazardous situation.

Related product manuals